Snap-8 Research: Structure and Laboratory Studies
Research only. All AVM Labs USA products are sold strictly for laboratory research. Nothing on this page is medical advice, and nothing here describes use in humans or animals.
Snap-8 is a synthetic octapeptide built as an extension of a shorter, better-known peptide: eight amino acids, with both ends modified. This guide explains it the way the laboratory literature does: its molecular structure, how it is synthesized and characterized, and how to read the studies that mention it.
What Snap-8 is, in laboratory terms
Snap-8 is the trade name for acetyl octapeptide-3, a synthetic linear octapeptide modelled on the N-terminal end of the SNAP-25 protein. Its INCI name is Acetyl Octapeptide-3. It was developed as an extended analogue of Argireline (acetyl hexapeptide-8), keeping the same first six residues and adding two more at the C-terminal end.
The design is the point of the name: Snap-8 takes a six-residue sequence and extends it to eight. A paper that says only “acetyl octapeptide” has not identified which extension was studied.
Molecular structure
The reported molecular identity of Snap-8 is:
- An eight-amino-acid chain — Glu-Glu-Met-Gln-Arg-Arg-Ala-Asp, written EEMQRRAD in one-letter code, in that order from the N-terminus.
- Two end modifications — an acetyl group at the N-terminus (Ac-) and an amide at the C-terminus (-NH2). The full written form is Ac-Glu-Glu-Met-Gln-Arg-Arg-Ala-Asp-NH2, or Ac-EEMQRRAD-NH2. The acetyl group and the amide are end groups, not residues.
- A molecular formula of C41H70N16O16S, with a molecular weight of approximately 1075.2 g/mol and a monoisotopic mass of 1074.49 Da.
- CAS number 868844-74-0, with PubChem CID 76283482 and UNII 8K14HJF88S.
- One sulfur atom — from the methionine residue at position 3, the only sulfur-bearing residue in the chain.
At approximately 1075.2 Da, Snap-8 is a small octapeptide, and that mass is the first identity check on a COA.
These are the structural facts a Certificate of Analysis verifies: the sequence, the eight residues, the two end modifications, and the molecular weight.
Snap-8 is not Argireline
Two names in this family are often confused, and the laboratory tells them apart by sequence and mass alone:
- Snap-8 (acetyl octapeptide-3) is an octapeptide: Ac-EEMQRRAD-NH2, eight residues, approximately 1075.2 Da, CAS 868844-74-0.
- Argireline (acetyl hexapeptide-8) is a hexapeptide: Ac-EEMQRR-NH2, six residues, approximately 888.5 Da. It is the first six residues of Snap-8, with no Ala-Asp at the end.
Two residues, about 186.7 Da apart — which is why the sequence on the COA, not the short name alone, settles which peptide a lot contains. A sample labelled Snap-8 that reads near 888.5 Da is Argireline, not Snap-8.
A note on conflicting records
Snap-8 carries conflicting records in public databases, and this draft follows the record that matches the sequence. PubChem carries a second record under the same CAS (CID 71587832, C42H72N16O15S, 1073.2 Da) whose structure contains a spurious enamine in place of the Glu1-Glu2 amide bond; the correct structure is CID 76283482 (C41H70N16O16S, 1075.2 Da), which matches the FDA/GSRS sequence and the Cayman Chemical cross-check. Other suppliers quote different formulas again — C43H73N15O16S at 1074.30 Da, and C34H60N14O13 at 873.0 Da — neither of which is consistent with the eight-residue sequence above. The COA for the lot must state the formula and mass it reports, and those must match Ac-EEMQRRAD-NH2.
How research peptides like Snap-8 are made: solid-phase synthesis
Like most research peptides, Snap-8 is produced by solid-phase peptide synthesis (SPPS):
- The first amino acid is anchored to a solid resin support.
- Amino acids are added one at a time, in the planned sequence, with the growing chain held on the resin.
- Protecting groups shield the parts of each amino acid that should not react yet, and are removed at the right step.
- The finished chain is cleaved from the resin, acetylated at the N-terminus and amidated at the C-terminus as specified, and purified.
The laboratory controls exactly the same variables as for a longer chain: which amino acids, in which order, and with which stereochemistry. All eight residues are the L-form, and that is part of the identity a COA verifies. Our post on peptide synthesis explains this method in detail.
How Snap-8 is characterized: identity and purity
A research peptide is not defined by its name alone. In the laboratory it is defined by analytical data, typically:
- Mass spectrometry (MS): confirms the molecular weight matches the intended sequence. For Snap-8 the observed mass must read approximately 1075.2 Da — not the 888.5 Da of Argireline, and not the 1073.2 Da of the erroneous PubChem record.
- High-performance liquid chromatography (HPLC): measures purity and reveals impurities, including deletion sequences or incomplete coupling products from synthesis.
- Certificate of Analysis (COA): the laboratory document that reports those results for a specific batch.
When comparing research materials, the COA is the document that matters: same compound, different batch, different data. Our guide on how to read a peptide COA explains what each field on that document means.
How Snap-8 is studied in the literature
The published record under the Snap-8 name is thin, and this draft says so plainly:
- Design literature: Snap-8 is described as an extension of the Argireline sequence, modelled on a fragment of the SNAP-25 protein. The design, the sequence and the catalogue identity are documented; the primary assay record for the eight-residue sequence itself is limited.
- Comparative work: where Snap-8 is discussed, it is discussed against Argireline, so that the two-residue extension can be distinguished by sequence and mass.
- Analytical studies: stability, solubility and degradation — how the peptide behaves in solution, at different temperatures, and over time.
A search of the published literature for the eight-residue sequence under the name Snap-8 or acetyl octapeptide-3 did not find a primary study reporting a cell-based or biochemical assay result specifically for that sequence. That is a fact about the record, not a gap to fill with the Argireline record: the six-residue peptide and the eight-residue peptide are different molecules, and results for one are not results for the other.
Stability and handling in the laboratory
Peptides are sensitive molecules, and laboratory handling reflects that. The topics researchers document include storage temperature, protection from light and moisture, freeze–thaw cycles, and how long a prepared solution remains stable. Our posts on peptide storage and stability and on refrigeration and shipping cover this in detail.
How to read a Snap-8 study
When you open a paper that mentions Snap-8, check four things first:
- What exactly was studied? The compound name, the sequence or identifier (Ac-EEMQRRAD-NH2), and the source of the material — and whether the paper means Snap-8, Argireline, or the SNAP-25 protein itself.
- In what model? Design discussion, in vitro assay, or another setting — and what that model can and cannot show.
- At what scale? The number of samples, the controls used, and whether the result was reproduced.
- Who funded it, and where was it published? Peer review and disclosure are part of the evidence, not decoration.
For the general background, start with What Are Peptides?
Related research on this blog
- What Are Peptides? — the general background for every post in this series: what-are-peptides
Glossary
- Octapeptide: a peptide of eight amino acid residues.
- Hexapeptide: a peptide of six amino acid residues.
- Acetyl group (Ac-): a modification at the N-terminus of a peptide chain.
- C-terminal amide: a chain ending in -NH2 rather than a free carboxylic acid.
- INCI name: the name used to catalogue a cosmetic ingredient.
- SPPS: solid-phase peptide synthesis, the standard laboratory method for building peptides.
- HPLC: high-performance liquid chromatography, used to measure purity.
- Mass spectrometry (MS): used to confirm molecular weight and identity.
- COA: Certificate of Analysis, the batch document reporting analytical results.
- In vitro: experiments outside a living organism, e.g. in cell culture.
Frequently asked questions (research framing)
Is Snap-8 the same as Argireline?
No. Snap-8 is an octapeptide of approximately 1075.2 Da; Argireline is a hexapeptide of approximately 888.5 Da, the first six residues of Snap-8.
What does the “8” in Snap-8 mean?
Eight residues in the chain: Glu-Glu-Met-Gln-Arg-Arg-Ala-Asp, with an acetyl group at one end and an amide at the other.
What does a COA tell me?
It reports the analytical results — identity and purity — for one specific batch, measured by the laboratory that tested it. For Snap-8, the key identity checks are the eight-residue sequence, the two end modifications, and the molecular weight of approximately 1075.2 Da.
Where can I learn more?
Start with the posts linked above, and read the primary literature they cite.
Research only. AVM Labs USA products are for laboratory research use only.
