Melanotan 1 research explained

Melanotan 1 Research: Structure and Laboratory Studies

Melanotan 1 Research: Structure and Laboratory Studies

Research only. All AVM Labs USA products are sold strictly for laboratory research. Nothing on this page is medical advice, and nothing here describes use in humans or animals.

Melanotan 1 is one of the most searched research peptides in the scientific literature, and it is also one of the most confused: its name is close to Melanotan II, but the two are different compounds. This guide explains Melanotan 1 the way the laboratory literature does: its molecular structure, how it is synthesized and characterized, and how to read the studies that mention it.

What Melanotan 1 is, in laboratory terms

Melanotan 1 is a synthetic peptide studied in the melanocortin receptor literature. It is a linear tridecapeptide — a chain of thirteen amino acids with two free ends — built as an analogue of alpha-MSH (alpha-melanocyte-stimulating hormone), the natural peptide that activates melanocortin receptors. It is also catalogued under the name afamelanotide and as [Nle4, D-Phe7]-alpha-MSH, which describes its two substitutions from the natural sequence.

In the published literature it is described as an agonist at melanocortin receptors in assay systems, with activity across several receptor subtypes, including MC1R, MC3R, MC4R and MC5R — which is how research papers identify it. It was developed in the melanocortin chemistry program at the University of Arizona in the 1980s, alongside the related cyclic peptide Melanotan II.

Molecular structure

The reported molecular formula of Melanotan 1 is C78H111N21O19, with a molecular weight of approximately 1646.8 Da (monoisotopic mass approximately 1645.84 Da). Its sequence is written Ac-Ser-Tyr-Ser-Nle-Glu-His-D-Phe-Arg-Trp-Gly-Lys-Pro-Val-NH2. Three structural features define it in the literature:

  • A thirteen-residue linear chain. The chain is Ser-Tyr-Ser-Nle-Glu-His-D-Phe-Arg-Trp-Gly-Lys-Pro-Val, with no ring and no bridge between residues. Its open shape is the first difference from Melanotan II.
  • Two non-standard features. The N-terminus carries an acetyl group (Ac) and a norleucine (Nle) residue at position 4, and one phenylalanine is the D-form (D-Phe) at position 7 rather than the usual L-form. Those two substitutions are what the name [Nle4, D-Phe7]-alpha-MSH records.
  • A C-terminal amide. The chain ends in an amide group (-NH2) rather than a free carboxylic acid.

The CAS number is 75921-69-6, with PubChem CID 16197727. These are structural facts, reported in the analytical literature — and what a Certificate of Analysis verifies.

Melanotan 1 is not Melanotan II, and it is not PT-141

Three names in this family are often confused, and the laboratory tells them apart by structure alone:

  • Melanotan 1 is a linear peptide of 13 amino acids — Ac-Ser-Tyr-Ser-Nle-Glu-His-D-Phe-Arg-Trp-Gly-Lys-Pro-Val-NH2 — with the molecular formula C78H111N21O19 and a molecular weight of approximately 1646.8 Da (CAS 75921-69-6).
  • Melanotan II is a cyclic heptapeptide — seven residues in a ring, C50H69N15O9, approximately 1024.18 Da, C-terminal amide (CAS 121062-08-6).
  • PT-141 is a cyclic heptapeptide with the same ring and the same seven residues as Melanotan II, but a free-acid C-terminus instead of an amide, at approximately 1025.2 Da.

Different chain lengths, different shapes, different masses — which is why the molecular weight is the first identity check on a COA, not a detail. A sample labelled Melanotan 1 that reads near 1024 Da is not Melanotan 1.

Why the linear chain matters in the laboratory

A linear peptide behaves differently in analysis from a cyclic peptide of similar size:

  • Chromatography: a linear peptide interacts with an HPLC column differently from a cyclic peptide, so retention time is part of its identity profile.
  • Mass spectrometry: the open chain fragments differently from a ring, so the MS pattern differs from that of Melanotan II even where residues overlap.
  • Stability in solution: the flexible open chain is less constrained than a ring, so its behaviour in solution is documented separately.

For a researcher reading a COA, the chain shape is therefore a check: the reported mass, the HPLC trace and the MS data must all be consistent with a linear molecule of 1646.8 Da.

How research peptides like Melanotan 1 are made: solid-phase synthesis

Like most research peptides, Melanotan 1 is produced by solid-phase peptide synthesis (SPPS):

  1. The first amino acid is anchored to a solid resin support.
  2. Amino acids are added one at a time, in the planned sequence, with the growing chain held on the resin.
  3. Protecting groups shield the parts of each amino acid that should not react yet, and are removed at the right step.
  4. The finished linear chain is cleaved from the resin and purified.

Because the sequence is built step by step, the laboratory controls exactly which peptide is produced — and can confirm it afterward. Our post on peptide synthesis explains this method in detail.

How Melanotan 1 is characterized: identity and purity

A research peptide is not defined by its name alone. In the laboratory it is defined by analytical data, typically:

  • Mass spectrometry (MS): confirms the molecular weight matches the intended sequence — the observed mass must read 1646.8 Da, not the 1024.18 Da of Melanotan II and not the 1025.2 Da of PT-141.
  • High-performance liquid chromatography (HPLC): measures purity and reveals impurities.
  • Certificate of Analysis (COA): the laboratory document that reports those results for a specific batch.

When comparing research materials, the COA is the document that matters: same compound, different batch, different data. AVM Labs USA publishes COAs for its research peptides for this reason. Our guide on how to read a peptide COA explains what each field on that document means.

How Melanotan 1 is studied in the literature

Laboratory research on Melanotan 1 takes several forms:

  • Structural studies: how the linear chain is arranged, and how stable the structure is under different conditions.
  • In vitro receptor assays: measurements of binding and activation at melanocortin receptors (MC1R, MC3R, MC4R, MC5R) in cell-based systems, where conditions are controlled and variables are isolated.
  • Analytical studies: stability, solubility and degradation — how the peptide behaves in solution, at different temperatures, and over time.

Stability and handling in the laboratory

Peptides are sensitive molecules, and laboratory handling reflects that. The topics researchers document include storage temperature, protection from light and moisture, freeze–thaw cycles, and how long a prepared solution remains stable. Our posts on peptide storage and stability and on refrigeration and shipping cover this in detail.

How to read a Melanotan 1 study

When you open a paper that mentions Melanotan 1, check four things first:

  1. What exactly was studied? The compound name, the sequence or identifier, and the source of the material — and whether the paper means Melanotan 1, Melanotan II, or PT-141.
  2. In what model? In vitro assay, animal model, or another setting — and what that model can and cannot show.
  3. At what scale? The number of samples, the controls used, and whether the result was reproduced.
  4. Who funded it, and where was it published? Peer review and disclosure are part of the evidence, not decoration.

For the general background, start with What Are Peptides?

Related research on this blog

  • Melanotan II Research — the cyclic heptapeptide in the same family, explained in laboratory terms: melanotan-ii-research
  • Sermorelin Research — a peptide studied in the GHRH literature: sermorelin-research
  • MOTS-c Research — a small peptide studied in metabolic research: mots-c-research

Glossary

  • Linear peptide: a peptide whose chain has two free ends, with no ring.
  • Tridecapeptide: a peptide of thirteen amino acids.
  • D-amino acid: the mirror-image form of a standard amino acid, used in synthetic peptide design.
  • Melanocortin receptor: a family of receptors (MC1R, MC3R, MC4R, MC5R and others) studied in the Melanotan 1 literature.
  • SPPS: solid-phase peptide synthesis, the standard laboratory method for building peptides.
  • HPLC: high-performance liquid chromatography, used to measure purity.
  • Mass spectrometry (MS): used to confirm molecular weight and identity.
  • COA: Certificate of Analysis, the batch document reporting analytical results.
  • In vitro: experiments outside a living organism, e.g. in cell culture.

Frequently asked questions (research framing)

Is Melanotan 1 the same as Melanotan II?

No. Melanotan 1 is a linear peptide of 13 amino acids, approximately 1646.8 Da; Melanotan II is a cyclic peptide of 7 amino acids, approximately 1024.18 Da.

How is Melanotan 1 different from PT-141?

Melanotan 1 is linear, with 13 residues; PT-141 is cyclic, with 7 residues in a ring and a free-acid C-terminus, at approximately 1025.2 Da.

What does a COA tell me?

It reports the analytical results — identity and purity — for one specific batch, measured by the laboratory that tested it. For Melanotan 1, the key identity check is the molecular weight of 1646.8 Da, confirming the linear 13-residue form.

Where can I learn more?

Start with the posts linked above, and read the primary literature they cite. For storage and handling, see our posts on peptide stability and refrigeration.


Research only. AVM Labs USA products are for laboratory research use only.

Scroll to Top
header ´para el telefono

Welcome back to AVM Labs USA. Sign in below to access your account and continue shopping.

Don’t have an account yet?
Create your AVM Labs USA account before signing in.