5-Amino-1MQ Research: Structure and Laboratory Studies
Research only. All AVM Labs USA products are sold strictly for laboratory research. Nothing on this page is medical advice, and nothing here describes use in humans or animals.
5-Amino-1MQ is one of the most searched research compounds in the scientific literature, and it is also one of the most commonly mislabelled: it is sold alongside peptides and often called one. It is not a peptide. This guide explains it the way the laboratory literature does: its molecular structure, how it is synthesized and characterized, and how to read the studies that mention it.
What 5-Amino-1MQ is, in laboratory terms
5-Amino-1MQ is short for 5-amino-1-methylquinolinium, a small synthetic organic molecule studied as an inhibitor of the enzyme nicotinamide N-methyltransferase (NNMT). It belongs to the quinolinium class: a quinoline ring that carries a methyl group on its ring nitrogen and an amino group at position 5.
A peptide is a chain of amino acid residues joined by amide bonds. 5-Amino-1MQ has no amide bond and no residues. It is a fused bicyclic aromatic ring system with two small substituents: the compound is identified by its ring structure and its charge, not by a sequence.
It comes from a 2017 structure-activity series of N-methylated quinolinium compounds from the University of Texas Medical Branch, in which quinoliniums inhibited NNMT in cell-free assays with IC50 values around 1 µM. The published evidence base is entirely preclinical.
Molecular structure
The reported identity of 5-Amino-1MQ depends on which form is being described, because the molecule is a permanently charged cation and is always supplied as a salt:
- The cation — 5-amino-1-methylquinolinium, formula C10H11N2+, with a molecular weight of approximately 159.21 g/mol and a monoisotopic mass of 159.092 Da. Its CAS number is 685079-15-6, with PubChem CID 950107.
- The iodide salt — the form most often supplied, formula C10H11IN2, with a molecular weight of approximately 286.11 g/mol. Its CAS number is 42464-96-0, with PubChem CID 66522933. The cation makes up a little over half the mass of the salt, which is why a COA must state which form was tested.
These are the structural facts a Certificate of Analysis verifies: the identity of the cation, the counter-ion of the salt form, and the molecular weight.
How it compares to MOTS-c and NAD+
5-Amino-1MQ is usually discussed alongside two other entries in the metabolism literature:
- 5-Amino-1MQ is a small molecule: a quinolinium cation of about 159.2 g/mol, built on a fused aromatic ring. It is studied as a tool inhibitor of NNMT in enzyme assays.
- MOTS-c is a 16-amino-acid mitochondrial-derived peptide studied in cell and animal models of metabolism. It is a chain of residues; 5-Amino-1MQ is not. Our post on MOTS-c Research covers that peptide.
- NAD+ is a coenzyme, a dinucleotide that carries electrons and ADP-ribose groups in cellular metabolism. NNMT, the enzyme 5-Amino-1MQ inhibits, transfers a methyl group from S-adenosyl-L-methionine (SAM) onto nicotinamide — a reaction that diverts nicotinamide away from the NAD+ salvage pathway. Our post on NAD+ Research covers that coenzyme.
Small molecule, peptide, coenzyme: three different chemical classes. That is the comparison the literature makes — and the reason 5-Amino-1MQ must not be filed under peptides.
How 5-Amino-1MQ is made: organic synthesis
Unlike the peptides in this catalogue, 5-Amino-1MQ is produced by organic synthesis:
- The starting point is the quinoline ring system, a fused bicyclic aromatic structure.
- The ring nitrogen is methylated, installing the methyl group that gives the molecule its permanent positive charge.
- The amino group is present at position 5 of the ring.
- The finished cation is isolated as a salt with a counter-ion — most often iodide — because a charged molecule cannot be isolated on its own.
- The product is purified and characterized before it is released as a reference material.
Because the molecule is assembled by organic chemistry, the laboratory controls a different set of variables: the ring substitution pattern, the counter-ion, and the purity of the salt. Our post on peptide synthesis explains the solid-phase method used for the peptides in this catalogue — a different method, for a different class of compounds.
How 5-Amino-1MQ is characterized: identity and purity
A research compound is not defined by its name alone. In the laboratory it is defined by analytical data, typically:
- Mass spectrometry (MS): confirms the molecular weight matches the intended structure. For 5-Amino-1MQ the cation is observed directly at m/z 159.1, because it already carries its charge; the salt form gives a higher mass, so the COA must state which form was measured.
- High-performance liquid chromatography (HPLC): measures purity and reveals impurities, including unreacted starting material or side products from synthesis.
- Nuclear magnetic resonance (NMR): confirms the ring substitution pattern — the methyl group on the ring nitrogen and the amino group at position 5.
- Certificate of Analysis (COA): the laboratory document that reports those results for a specific batch.
When comparing research materials, the COA is the document that matters: same compound, different batch, different data. Our guide on how to read a peptide COA explains what each field on that document means.
How 5-Amino-1MQ is studied in the literature
Laboratory research on 5-Amino-1MQ takes several forms:
- Cell-free enzyme assays: measurements of NNMT activity with and without the compound, where conditions are controlled and variables are isolated. The 2017 series reported inhibition with IC50 values around 1 µM in this setting.
- Cell-based assays: measurements of methylation metabolism in cultured cells, where the compound is used as a tool to block NNMT activity.
- Animal models: studies in rodents, where the compound is used as a research tool in preclinical work.
The record is preclinical throughout.
Stability and handling in the laboratory
Research compounds are sensitive materials, and laboratory handling reflects that. The topics researchers document include storage temperature, protection from light and moisture, and how long a prepared solution remains stable. Our posts on peptide storage and stability and on refrigeration and shipping cover storage and handling in detail.
How to read a 5-Amino-1MQ study
When you open a paper that mentions 5-Amino-1MQ, check four things first:
- What exactly was studied? The compound name, the salt form, and the source of the material — cation or iodide salt changes the mass.
- In what model? Cell-free enzyme assay, cell culture, or animal model — and what that model can and cannot show.
- At what scale? The number of samples, the controls used, and whether the result was reproduced.
- Who funded it, and where was it published? Peer review and disclosure are part of the evidence, not decoration.
For background on peptides, start with What Are Peptides?
Related research on this blog
- MOTS-c Research — a 16-amino-acid mitochondrial peptide studied in metabolism research: mots-c-research
- NAD+ Research — the coenzyme at the centre of the salvage pathway NNMT diverts from: nad-plus-research
- Glutathione Research — redox biology in the scientific literature: glutathione-research
Glossary
- NNMT: nicotinamide N-methyltransferase, a cytosolic enzyme that transfers a methyl group from SAM onto nicotinamide.
- SAM: S-adenosyl-L-methionine, the methyl donor used by NNMT.
- Quinolinium: a quinoline ring with a methylated ring nitrogen.
- Salt form: the combination of a charged molecule with a counter-ion, such as iodide; the form changes the molecular weight on a COA.
- IC50: the concentration that inhibits an enzyme’s activity by half in an assay.
- SPPS: solid-phase peptide synthesis, the standard laboratory method for building peptides — not used for this small molecule.
- HPLC: high-performance liquid chromatography, used to measure purity.
- Mass spectrometry (MS): used to confirm molecular weight and identity.
- NMR: nuclear magnetic resonance, used to confirm molecular structure.
- COA: Certificate of Analysis, the batch document reporting analytical results.
- In vitro: experiments outside a living organism, e.g. in cell culture or in a cell-free assay.
Frequently asked questions (research framing)
Is 5-Amino-1MQ a peptide?
No. A peptide is a chain of amino acid residues joined by amide bonds. 5-Amino-1MQ has no amide bond and no residues: it is a quinolinium cation, a fused bicyclic aromatic ring with a methyl group on its ring nitrogen and an amino group at position 5.
Why do different sources list different molecular weights?
Because the cation and the salt have different masses. The cation alone is about 159.21 g/mol (CAS 685079-15-6); the iodide salt most often supplied is about 286.11 g/mol (CAS 42464-96-0). A COA must state which form was tested.
What does a COA tell me?
It reports the analytical results — identity and purity — for one specific batch, measured by the laboratory that tested it. For 5-Amino-1MQ, the key identity checks are the quinolinium structure, the counter-ion of the salt form, and the molecular weight of the form stated.
Where can I learn more?
Start with the posts linked above, and read the primary literature they cite.
Research only. AVM Labs USA products are for laboratory research use only.
